Recording of index signals – Panasonic NV-F65EA User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

bexS

With the VHS Index Search function, up to 20 addresses

(places where index signals are recorded) can be skipped

to directly locate the beginning of the desired programme in

both forward and reverse direction in the Fast Forward or

Rewind mode.

^ Press the Play Button (►) or Stop Button (■).

Press the Memory/Repeat/Search Button.

•The indication “S” appears on the Multi-Function

Display.

@ Repeatedly press the Reset/Index Button to select the

desired address.

The number of the selected address is shown on the

Multi-Function Display,

O Press the Rewind ◄◄/Review @ or Fast Forward

►►/Cue Q Button to start the VHS Index Search

function (the VTR will switch to the rewind or fast-
forward mode).

• Every time an index signal (address) is skipped the

number in the Address Indication decreases by one.

•When the preset address is reached, the Tape Counter

Indication will appear in place of the Address Indication,
and the normal playback will start.

•To abort the Index Search function midway, press the

Play or the Stop Button.

r ------------------------------------------------------------------------------- ^

•When activating the VHS Index Search function

from the Still playback mode, the Playback will start
when the selected programme is reached.

• If there are unrecorded parts on the tape, or if

recordings have repeatedly been made on the same
tape portion, the VHS Index Search function may
not work correctly.

•The VHS Index Search function can only count the

addresses correctly, if the index signals are spaced

at least 2 minutes (SP mode) and 5 minutes (LP
mode).

• If the VHS Index Search function is started ex

tremely close to the beginning of the next pro
gramme (place where an address signal is

recorded) or from the beginning of the tape, the first
address may not be counted.

Recording of Index Signals

While recording an index signal, the indication “WRITE” on
the Multi-Function Display lights up for a few seconds.

index signals will be recorded automatically in the

following cases;

•At the tape position at which the Record Button is

pressed to start recording.

•At the tape position at which a Timer Recording is

started.

•At the tape position at which an OTR recording is

started.

•When pressing the REC Button during recording.

(

)