Panasonic NV-F65EA - Manual (Page 38)

The Time Search function makes if possible to quickly
advance the tape from any position by inputting the exact
desired amount of playback time of the part that you want to
skip.
beginning of
tape
@ Input the time of the desired scene.
•The time is input by pressing the number buttons in
the order: hour, minute, second.
•The indicatioin will be counted as “0”.
COUNT
Q Press the Fast Forward ►►/Cue @ Button or the
Rewind ◄◄/Review 53 Button.
The playback starts after rewinding or fast forwarding
to the tape position of the designated time.
SHI
iii
The operation is the same as that for the stop mode but in
operation step 0> the Cue or Review (playback) is
performed to the tape position of the designated time and
the playback will then start.
If the time search function is activated during playback, a
time of up to 9 minutes 59 seconds can be input.
•The numbers in the Tape Counter do not change
during parts of the tape on which there is no
recording.
•When the tape is inserted, the Tape Counter will
automatically be reset to “0;00.00".
•When no time is input for the time search, a
2-minute tape segment is skipped and the playback
will then resume. If the time search function is
activated during playback, but no time is input, a
30-second tape segment will be skipped and the
playback will then resume.
O Put the VTR in “STOP” mode.
@ Press the Time Search Button.
The indication in the Multi-Function Display changes as
shown below.
COUNT