Panasonic PV-D4752 - Manual (Page 51)

Check the following points If you are having trouble with your DECK.
DVD/Video CD/CD Correction
Play fails to start even when PLAY is
pressed...
• This DECK cannot play discs other than DVDs,
Video CDs and CDs.
• The disc may be dirty and require cleaning.
Play starts but then stops immediately... • Be sure disc is installed with label side up.
Picture is distorted during rapid
advance or rapid reverse...
• The picture will be somewhat distorted at times:
this is normal.
No Forward/Reverse Scene Search
play... • Some discs may have sections which prohibit
Forward/Reverse Scene Search, (p. 23)
Play does not start even when title is
selected...
• Confirm the “DVD LOCK” setting, (p. 44)
Audio soundtrack and/or subtitle
language is not the one selected at
the initial settings...
• If the audio soundtrack and/or subtitle language
selected at DVD initial settings does not exist
on the disc, it will not be accessible.
No subtitles... • Subtitles appear only when available on disc.
• “OFF” is selected at the changing subtitle
language. Select “ON” at the “Subtitle Languages”
section (p. 36) to display the subtitles.
Alternative audio soundtrack
(or subtitle) language cannot be
selected...
• Alternative language cannot be selected with discs
which do not contain more than one language.
• For some discs, alternative language cannot be
selected with the AUDIO or SUB TITLE button.
Try selecting it from the DVD MENU if available.
Angle cannot be changed... • This function is dependent on software availability.
Even if disc has multiple angles, they may be
recorded for specific scenes only (ANGLE
indicator on DECK lights up), (p. 37)
Miscellaneous Correction
Programs cannot be viewed on TV... • Make sure TV is set to output of DECK.
• Check connections between DECK,
external antenna, and TV.
• Set VCR/TV selector to “TV.” (p. 21)
• Make sure proper signal source is selected.
Video cassette cannot be inserted... • Insert the cassette with window side up; record
tab facing you.
Video cassette ejects when
a recording is started or the power is
turned off for timer recording...
• Make sure cassette record tab is intact, (p. 6)
In Stop mode, the motor (CYLINDER)
continues to rotate...
• To enable Quick play mechanism, the cylinder will
rotate for about 3 minutes. This reduces response
time from Stop to Play mode.
The disc cannot be removed.. • First, unplug DECK. Then, prepare a rigid wire
(e.g. an extended paper clip) and, applying
moderate force, insert it straight into the hole at the
base of the tray. The tray will eject a little. Now, pull
the tray all the way out and remove the disc. (p. 9)
If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262).
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262).
or send e-mail to : [email protected]
51