Panasonic PV-D4752 - Manual (Page 26)

MTS Broadcast/
vms
m-ri stereo sysiem
Connection
Make the Audio/Video Connection as shown on pp. 12 ~ 15.
• You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.
Receivable Broadcast Types
The following are possible audio broadcast types and on­
screen displays.
The signal being received is indicated with an “[(<” mark
while the selected audio mode is indicated with an arrow.
To display the broadcast signal being received,
-► press DISPLAY*.
MTS Stereo and SAP broadcast
Multi-channel Television Sound
Stereo (main language) and
Secondary Audio Program (sub
language) broadcasts are being
received simultaneously.
Select STEREO or SAP audio mode.
MTS stereo broadcast
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
• If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
STOP 12:00AM CH 02
0 : 00:00
((«STEREO ◄ SP
((«SAP
MONO
STOP 12:00AM CH 02
0:00:00
((«STEREO ◄ SP CiAP
MONO
DISPLAY
AUDIO
(SAP/Hi-Fi)
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
STOP 12:00AM CH 02
0 : 00:00
STEREO SP
((«SAP ◄
MONO
STOP 12:00AM CH 02
0 : 00:00
STEREO SP
«?AP
MONO ◄
Equipped with dbx®-TV
Noise Reduction for
true MTS reproduction.
dbx®-TV Noise
Reduction is required
for good stereo
separation and audio
fidelity, dbx® is a
registered trademark,
and is licensed by dbx®
Technology Licensing.
26
For assistance, please call : l-SOO-211-PANA(7262) or send e-mail to : [email protected]