Before doing initial setup, Turn tv on, Doing initial setup (ready to play) – Panasonic PV-D4752 User Manual

Page 16: Plugging the ac power plug into an ac outlet

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

initial betup tor basic connections (Ready to Play)

Before doing Initial Setup

Turn TV on.

See connections @ RF Coaxial Cable Connection and ® AV Cable Connection on p. 12.

Set TV to channel 3.

Set TV to VIDEO.

[DECK ^ TV]

• Go to “Doing Initial Setup (Ready to Play).” (See below.)

[Cable Box ^ DECK ^ TV], [DSS ^ DECK ^ TV]

• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel

in your time zone.

• If you use a DSS Receiver, it must be turned off.

Doing Initial Setup (Ready to Play)

Press VCR on remote for VCR mode.

Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel

and clock set starts.

• If screen below does not appear, check DECK - TV connection and, if TV is tuned to

channel 3, try switching it to channel 4.

• To change VCR’s output channel, please refer to “VCR’s Output Channel” on p. 19.

Plugging the AC Power Plug into

an AC outlet

-CH AUTO SET PROCEEDING-

CANCElT: STO^ ^

AUTO CLOCK SET

^ PROCEEDING

CANCEL:STOP