Panasonic PV-D4752 - Manual (Page 24)

Timer Kecoraing
Ready Checklist
□ All connections are made (pp. 12 ~ 15).
□ TV and DECK are plugged in.
□ Clock set correctly.
□ Tape has rec.tab. {p. 6)
□ Remote is in VCR mode. (Press VCR.)
□ Sufficient tape remaining for recording time.
1 Press PROG*
to display Program.
____
SELECT START DATE
SELECT;A▼
SET
;SET
END :PROG
Example
Today
1) To set record DATE,
press AT to select;
1-31= one time, or
DAILY= MON- FRI, or
WEEKLY= same time
each week and
press SET.
• See selection order left.
■14-31—1 —12
,, SELECTA/T
Selection Order
WEEKLY .
(SAT)
1
DAILY
I
WEEKLY
(SUN)
I
WEEKLY
(MON)
2) To set remaining items,
press AT
to select and
press SET
to set START/ STOP times,
CH(channel) or LINE input
(p. 35), and tape speed
(SP, LP, SLP).
Press PROG
to end programming.
m START STOP CH 5^
CANCEL
SELECT 1-8
ENTER
EXIT
AOD/DLT
A T
SET
PROG
To Enter More Programs,
press AT
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.
VCR mode Indicator
Multi Function Display
■VCR • TiMER
, l\ L L -4*
/|\
VCR REC Indicator TIMER Indicator
The “Timer” Indicator lights up on DECK.
You can do Timer Recording with the power or off.
“TIMER REC WILL START SOON” appears on-screen for 2 minutes
before Timer Recording starts. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode indicator and
“REC” will flash on Multi function Display.
24
For assistance, please call;
1
-
80
O-
21
1-PANA(7262) or send e-mail to; [email protected]