Panasonic OMNIVISION PV-8450 - Manual (Page 22)

SpeciaTVC^Teature^(contin^^
^Important: If the remote control POWER, ACTION, PROG, CHA/T , INDEX, or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
[N^Check list before you begin.
n All connections are made.
{See pages 6-9.)
O VCR is plugged in.
□ TV is turned on and set to the VCR
channel {CH 3 or 4).
RECn’IME
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject This feature may be used to keep young children
from operating the VCR.
Hold down REC/TIME on the
VCR without a cassette inserted
for 7 seconds while in Stop mode.
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
VCR for 7 seconds again while in
Stop mode.
VCR LOCK ACTIVATED
VCR LOCK OFF
VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
2
3
Warning Beeper Feature
When you select BEEPER ON, a short wraming viill sound each time an
invalid entry or incomplete operation is made.
2
Press AW to select “SET UP
VCR,” and then press ► to
display the “SET UP VCR” screen.
3
Press
AW
to select “BEEPER,”
and then press ► to select “ON”
or “OFF.”
4
Press ACTION twice to exit this
screen.
1
Press ACTION* to display the menu. ( — m e n d
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
101 ОМА/ LANGUE: ENGL ISH
SELECT:A f KEY
SET ;► KEY
END :ACT ION KEY
------- SET UP VCR ---------------
REPEAT PLAY ; ON
■ SH3 : ON
NOISY CH BLUE BACK: ON
SELECT;A T KEY
SET :► KEY
END :ACT ION KEY
22