Check list before you begin, Time stamp feature, 1 press action to display the menu – Panasonic OMNIVISION PV-8450 User Manual
Page 21: Display the “set up feature” screen, 3 press ► to select "on” or "off, Press action twice to exit, Blue back on/off feature, 3 press action to display the menu, Display the "set up vcr” screen, Press at to select “noisy ch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q'c
Check list before you begin.
□ Clock is set to correct time.
2
3
b
*
c
When the VCR is
connected to a
Combination VCR
which has a Blue Back feature,
even if the VCR Blue Back is set
to “OFF" on the VCR, the screen
will go to blue back.
Time Stamp Feature
Whenever a recording is made, the VCR automatically writes the following
program data on the tape: Date, Start time, Scheduled stop time (for Timer
Rec. only), Channel No., Category (for Timer Rec. only). About 7 seconds
after playback is started, this information will be displayed for 5 seconds.
1 Press ACTION
to display the menu.
2
Press
AT
to select “SETUP
FEATURE,"
and then press
► to
display the “SET UP FEATURE” screen.
3
Press
► to select "ON” or "OFF."
• When “OFP is selected, the program data is
written on the tape, but will not be displayed
for the first 5 seconds of playback.
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
to 10МА/ UWGUE: ENGL I SH
SELECT:A ▼ KEY
SET :► KEY
END
:ACT ION KEY
------- SET UP FEATURE --------------
:
off
SET
END
:► KEY
; ACT ION KEY.
Press ACTION twice
to exit.
Normal/
One Touch Recording
Timer Recording
When Clock is not set.
12/2В/1ЭЭВ MON
12:00PM
CH 08 ABC
12/28/1998 MON
12:00PM -
1:00PM
CH 08 ABC
SPORTS
If the tape speed is changed immediately after recording begins,
the display may be incorrect. .
Blue Back ON/OFF Feature
You may choose whether or not you want the VCR to display a solid blue
back screen when the broadcast signal is very weak.
3 Press ACTION
to display the menu.
b
Press
AT
to select “SET UP
VCR,”
and then press
► to
display the "SET UP VCR” screen.
MENU
HgAlliEtHil
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID 10MA/ U\NGUE: ENGLI SH
SELECT:* ▼ KEY
SET :► KEY
END ; ACT I ON KEY
------------ SET UP VCR -----------------
REPEAT PLAY
BEEPER
NOISY CH BLUE BACK
SELECT:* ▼ KEY
SET :► KEY
END
:ACT ION KEY
Press
AT
to select “NOISY CH
BLUE BACK,”
and then press ►
to select “ON” or “OFF.”
• When “ON" is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When "OFP is selected, the picture
is displayed regardless of the signal condition.
• The picture can not always be seen clearly when “OFP is selected.
Press ACTION twice
to exit.
ON
ON
OH
21