Panasonic OMNIVISION PV-8450 - Manual (Page 19)

POWER Multi Function Display
Cancel a Timer Recording:
(Recording is in progress)
Press POWER and then STOP within 10 seconds to
cancel the timer recording.
• The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Press PROG to display all currently
set programs.
2 Press AT and ► to select and
set a program number.
(See page 18.)
3 Press AT and ◄►to select
and set replacement timer
information.
4 Press PROG twice to exit this mode.
P DT START STOP CM SPO
2 8 10:00P12:00P125 SP
3 10 8:00P 9;00P 10 SP
4 SU 9:O0P1O;OOP L LP
SELECT 1-8:A Y KEY
ENTER KEY
END :PROG KEY
START STOP
CATEGORY; SPORTS
ABC
SP
BraHnHKQB
SELECT:A ▼ KEY
SET
► KEY
END :PROO KEY
Review or Clear Program Contents:
(Recording is not in progress)
1 Press PROG to display all currently
set programs.
2 Press AT to select “TIMER
PROGRAM,” and then press ► to
display all currently set programs.
3 Press AT to select a program
number.
4 Press ADD/DLT if you want
to clear the program.
5 Press PROG to exit this mode.
P DT
2 8 10:OOP12:ODP125 SP
3 10 8:00P 9:0DP 10 SP
4 SU 9:OOP10:OOP L LP
CANCEL:ADO/DLT KEY
SELECT 1-8:A ▼ KEY
ENTER ;► KEY
END
:PHOG KEY
P DT START STOP CM SPO
□------------:-----------
2 8 10:OOP12:OOP125 SP
3 10 8:OOP 9:OOP 10 SP
4 SU 9:00P10:00P L LP
SELECT 1-8:* t KEY
ENTER KEY
END : PROG KEY
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and press REW to enter the Program mode.
2 Press FF or REC/TIME repeatedly or hold down to make selections.
3 Press PLAY to set the item and move on.
• To make corrections, repeatedly press PLAY to move the cursor to the right,
or REW to move to the left to the incorrect entry and make the correction.
4 Press STOP/EJECT and REW together to display program contents
after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and press REW, (release REW first, and
then' release STOP/EJECT) to exit this mode.
6 Insert a cassette with record tab and press POWER off to set the timer.
19