Panasonic OMNIVISION PV-8450 - Manual (Page 18)

Timer Recording
^Important: If the remote control POWER, ACTION, PROG, CHA/T , INDEX, or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
You can set up the VCR to record a one
time, daily, or weekly program while you are
away or otherwise occupied. Up to 0
programs can be stored in memory.
I^Check list before you begin.
□ All connections are made.
(See pages 6-9.)
n TV and VCR are plugged in and turned on.
Q VCR/TV selector is set to “VCR."
Q Clock is set to correct time.
Q Record tab in place. (See page 5.)
1
4
5
1
Press PROG* to display the
program screen.
• If a program is already in memory, press
and ^ to select an unused program number.
START STOP CH
CATE'
SoRY:
BiHaBHaEiBB
SELECT:A ▼ KEY
SET :► KEY
END : PROG KEY
Press
AT
and ^ to select and
set one of the following as the DATE:
• 1~31 ^ne time recording
• DAILY =Same time MON-FRI
• WEEKLY (SUN-SAT)=Same time once a week
Example ^8—9................31 1 — 2 - *
Today’s Date_7 SELECTA
/T
Selection Order DAILY
L WEEKLY WEEKLY__________ WEEKLY J
------ (SUN) (SAT) (MON)
Press
AT
and
to select and set each
of the remaining
items at right.
Remaining Items to be set:
• START time
• STOP time
• CH(annel) number, or LINE
for outside source recording
• Category (N/A [not applicable],
SPORTS, MOVIE, COMEDY,
MUSIC, DRAMA)
• Speed (SP. LP, SLP)
T o Make Corrections
Repeatedly press ► to move the cursor to the right, or M to
move to the left to the incorrect entry and make the correction.
Press PROG to end the program.
• This screen appears for confirmation.
P DT START STOP CH SPO
3 ------- ;—
4 ------------ : -----------
To Enter More Programs
Press AT and ^ to select and set a blank
program number, and then repeat steps 3 and 4.
5
Press PROG to exit this mode.
Press POWER off to set the timer.
• When recording programs via a cable box.
make sure the cable box is left ON and
tuned to the desired channel.
CANCELrADO/DLT KEY
SELECT
1 - 8 : A ▼ KEY
ENTER ;► KEY
END :PROG KEY
-Eimgsi-
Mutti Function Display
18
• A cassette with no record tab is ejected and TIMER" flashes when the power is turned off to set the timer.
• If the start times of two programs overlap, the lower numbered program will have prbrity.
• If the start time for a timer recording comes up during a nomieil recording or One Touch Recording (page 17),
the timer recording will not be performed.
• If there is a power interruption of more than one minute, ftie recording will not be performed or continue.