Weekly timer recording, Daily timer recording, Timer recording from an external signal source – Panasonic NV-HD630 User Manual
Page 30: Setting other programmes in succession
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Weekly Timer Recording
In step 3, select the desired day by pressing DATE
For example, SU (Sunday)
On Screen Display
DATE i
+
CH DATE ON OFF
2 SU —:----------------- :—
Ф
—
END .TfMERREC
CHECK : PROG CHECK
(SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday,
TH=Thursday, FR=Friday, SA=Saturday)
Daily Timer Recording
For this timer function, several groups of days can be
selected.
(A)
Daily recording from Monday to Friday (MO-FR)
(D Daily recording from Monday to Saturday (MO-SA)
© Daily recording from Sunday to Saturday (SU-SA)
In step 3, select the desired days by pressing DATE
For example, ©
DATE
+
О
CH DATE ON OFF
2 SU-SA—:-------------
a
Timer Recording from an External Signal
Source
If timer recording is performed by a unit connected to the
audio/video input sockets, select the A1 or A2 indicator in
step 2 for the programme position.
CH
О
CH DATE ON
A1----------------
OFF
—SP
э a
END ; TIMER REC
CHECK -PROa CHECK
Setting other Programmes in Succession
Repeat steps 1-6.
Programming a Timer Recording of a TV
Programme Until its End (Auto SP/LP
Change Function)
If, during a timer recording performed in the SP mode, the
VCR determines that the remaining tape time is insufficient
to record the programme to its end, the Auto SP/LP Change
function automatically changes the tape speed to LP to
ensure that the whole programme will be recorded.
Depending on the remaining tape length, recording may be
performed in the LP mode from the start. However, if the
remaining tape time is still not sufficient in this case, the
programme cannot be recorded to the end.
Example (Remaining Tape Time 60 min.):
30 min. Recording by
SP mode
30 min.
15 min. Recording by
SP mode
30
Video
Tape
Timer
Programming
Л
1SI rrogram
(30 min.)
30min.
Recording
byLP
\ mode
(45 min.
3rd Program will
not be recorded.
• The tape length must be set correctly.(See page 22.)
• Tapes except T30, -60, -90, -120, -140,-160, -180 tapes
may not work correctly.
To Activate the Auto SP/LP Change Function:
Press SPEED to select “A”.
SPEED
Q
CH DATE ON OFF
2 27WE 20:02 21:30
a 0 Э Ш
Every time you press SPEED, the indication changes in
the following order:
►SP-^LP-^A------,
SO