Fine tuning procedure, Direct tuning – Panasonic NV-HD630 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Manual Tuning Procedure

Fine Tuning Procedure

Press MENU.
Select TUNER PRESET by pressing

and

ENTER.
Select CH by pressing

then select the channel

number you want tuned by pressing ◄ or ►.
Confirm that CLEAR is set to OFF.
Select SEARCH by pressing

then press ◄ or

►

On Screen Display

If the desired TV station has not been tuned, press ◄ or
► again.
• Press MENU and repeat steps 3-5 for each

programme position you want to tune to a station.

• To exit, press MENU three times.

Direct Tuning

1 Repeat steps 1-4 in Manual Tuning.
2 Select SEARCH by pressing

or T.

3 Using the numeric buttons on the remote controller

(Ensure that VCR/TV switch is set to VCR.), enter the
same number as the number of the channel to be tuned.
For the 5A and 9A channels, input the following
numbers: 90 for CH-5A, 91 for CH-9A.
• For other channels that require tuning, repeat steps 3-

4 in Manual Tuning and steps 2-3 above.

• To exit, press MENU twice.

Press MENU.

Select TUNER PRESET by pressing

and

ENTER.
Select CH by pressing

or ▼ then select the

programme position by pressing ◄ or ►.
Select FINE by pressing

Press ◄ or ► to obtain the best tuning condition.

• To return the tuning to its former state, press ENTER.
Press MENU.

Blanking of Unused Programme Positions

Press MENU.

Select TUNER PRESET by pressing

and

ENTER.
Select CH by pressing

then select the

programme position by pressing ◄ or ►.
Select CLEAR by pressing

Select ON by pressing ◄ or ►.
• Repeat steps 3-5 for other unused programme

positions to skip during the selection of programme
positions.

• To cancel the blanking of a programme position, select

that programme position then select CLEAR OFF.

Press MENU twice.