Play-off timer, To play back the recorded part repeatediy, Cd) a – Panasonic NV-HD630 User Manual
Page 25: Other playback functions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAY-OFF TIMER
Whenever you are playing back and wish to stop the tape
automatically, simply set the playback duration by pressing
PLAY/OFF H ► repeatedly.
The duration indicated on the VCR display changes by
pressing PLAY/OFF □ ► as follows.
I—» Counter display (normal playback mode)----------» 30 —
(min.)
I— 240«------------- 180«-------------120«-------------60«-------
(min.)
(min.)
(min.)
(min.)
Press PLAY/OFF Q on the VCR main unit during
playback.
• The VCR will automatically switch off when Play-Off Timer
is completed. To turn the VCR on again, press POWER (*)
(POWER (b/l).
Notes:
• The Play-Off Timer function works during normal
playback.
• When the tape reaches its end during Play-Off Timer, the
tape will be rewound to the start and the VCR will turn
itself off.
• To stop Play-Off Timer at any time, press □ (STOP) or
POWER (b (POWER (!)/l).
• Repeat Playback function does not work during Play-Off
Timer.
Other Playback Functions
To Obtain a High Speed Picture During
Fast Forward or Rewind
Keep ►► (FF) pressed during fast forward.
Keep ◄◄ (REVio pressed during rewind.
To Eject the Video Cassette Using the
Remote Controlier
Keep pressing □ (STOP) for at least 3 seconds.
To Play back the Recorded Part
Repeatediy
Press REPEAT or keep > (PLAY) pressed for 5 seconds or
more.
The “R ►" display appears on the TV screen.
REPEAT
o
Beginning
End of
of Tape
Recorded Part
LJ I f j.....
UM \
EH
Repeat Playback ^
PLAY
(CD) a
Control signal
Interruption
(at least 5 sec.)
REW
• Repeat Playback function does not work during
Play-Off Timer.
• Press □ (STOP) to release the VCR from the Repeat
Playback mode.
Notes:
• Set NTSC PB SELECT according to the TV system of
your TV.
When playback the NTSC tapes:
on PAL TV: For PAL TV.
4.43:
For NTSC (4.43) TV.
3.58:
For NTSC (3.58) TV.
When playback the PAL tapes:
You do not need to set NTSC PB SELECT.
NTSC 3.58 recording requires NTSC INPUT SELECT to
be in the AUTO or 3.58 position, however if NTSC INPUT
SELECT is in this position when recording a NTSC 3.58
signal, no colour is available for the PAL TV. Once the
recording is completed, you then need to select on PAL
TV to view the recording in colour on PAL TV.
• Audio reproduction of linear (conventionally recorded)
tapes will be monaural when played back on the FM Hi-Fi
video recorders.
• Cue, review or slow playback will be automatically
released after 10 minutes, and still playback, after 5
minutes.
• In Cue and Review playback, noise bars and distortions
may occur on the screen. However, this is not a
malfunction.
• In the LP (EP) mode only:
1. During any playback mode other than normal
playback, the picture may have some noise bars, the
colour may be unstable, or a black and white picture
may appear.
2. When playing back a tape which was recorded on
another VCR, it may be necessary to adjust tracking
control. In some cases the picture quality may still be
inferior. This is due to format constraints.
3. Depending on the TV set used, the playback picture
may roll up or down during special playback (Pause,
Cue, Review, or Slow playback mode). However, this
is not an indication of a malfunction.
.O
5
CD
.O
CO
CQ
25