Qac in connector, Qsignal gnd terminal, 0 fan motor – Panasonic DVCPRO AJ-D220 P User Manual
Page 8: O handle, 0s’video out connector, 0 video out connector, O video monitor out connector, Q audio out connector, 0 rf converter output connector, 0rf converter output selector switch (ch3/ch4)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Controls and Their Functions
Connector Section
QAC IN connector
Use the power cord supplied to connect this
connector to the power outlet.
QSIGNAL GND terminal
This is connected to the signal ground terminal on
the unit connected in order to reduce the noise. It
is not a safety ground.
0 Fan motor
This is for cooling the unit.
O Handle
0S’VIDEO OUT connector
This is the output connector for the S-VIDEO video
signals.
0 VIDEO OUT connector
This is the output connector for the analog video
signals.
O VIDEO MONITOR OUT connector
This is the output connector for the video monitor
signals.
Superimposed video signals can be output from it.
Q AUDIO OUT connector
This is the output connector for the analog audio
signals.
0 RF converter output connector
Pictures can be monitored when this connector is
connected to the ANT connector on the TV.
0RF converter output selector switch (CH3/CH4)
-
8
-