Panasonic DVCPRO AJ-D220 P - Manual (Page 19)

Set-up Menus
BASIC menu
Item Setting
Description of settings
No.
Superimposed
display
No.
Superimposed
display
000 DISPLAY SEL QOQO
0001
0002
OFE
TIME
T, STA
This sets what is to be displayed for the superimpose
signals output from the VIDEO MONITOR OUT
connector.
0: No display
1: Only the time is displayed.
2: The time and operation mode are displayed.
001 CHARA H-POS 0000
0001
om
0007
0
1
7
This sets the horizontal position of the superimposed
characters (8 settings to choose from).
002 CHARA V-POS 0000
0001
0003
ÍÍ0QZ
0
1
3
This sets the vertical position of the superimposed
characters (8 settings to choose from).
003 CHARA TYPE
om
0001
WHIT£
W/OUT
This selects the type of characters for the
superimposed display and menu display.
0: White characters appear on a black back ground.
1: White characters with black borders appear.
The underlined number and item are the factory settings.
While setting "CHARA H-POS", “CHARA V-POS", and “CHARA TYPE", the counter display can be viewed
by holding down the MODE button, allowing you to check the settings. You can also use the DATA+ and
DATA- buttons while holding down the MODE button to adjust the values while you are viewing them.
-
19
-