Panasonic DVCPRO AJ-D220 P - Manual (Page 20)

Set-up Menus
OPERATION menu
Item Setting
Description of settings
No.
Superimposed No. Superimposed
display display
100 LOCAL 0000 DISABLE This selects the switches on the front panel which can
ENABLE 0001 ST. EJ be operated in the remote control mode.
0; None of the switches can be operated.
1: Only the STOP and EJECT switches can be operated.
101 TAPE TIMER om - 12H This selects the CTL counter display.
0001 24H 0: ± 12-hour display
1: 24-hour display
102 S/F/R BACK 0000 BLACK This selects the BLACKA/V output during stop, fast
SEL 0001 TAPE forwarding or rewinding.
0: BLACK is output.
1: VV is output.
103 WIDE MODE 0000 AUTQ This selects the WIDE mode.
0001 WIDE 0: Automatic detection.
0002 NORMAL 1: The screen mode is forcibly treated as WIDE.
2; The screen mode is forcibly treated as NORMAL.
104 TAPE IN MODE QQQQ STOP This selects the operation which follows when the
0001 REW cassette is inserted.
0002 PAUSE 0: STOP
0003 PLAY 1: Rewind
2: Play pause
3: Play
105 TAPE END 0000 STOP This selects the operation which follows when the tape
MODE 0001 REW has reached the end.
0002 REW-EJ 0; Stop
0003 EJECT 1: Rewind
2: This rewinds the tape and ejects it upon completion
of rewinding.
3: Eject
108 FORMAT SEL 0000 DVCPRO This selects the format when an L cassette is used.
0001 DV 0: DVCPRO mode
0002 DVCAM 1: DV mode
2; DVCAM mode
The cassette tape is played back in one of the modes listed below depending on the tape type and
settings used.
Type
FORMAT SEL setting
DVCPRO DV DVCAM
S size cassette DV DV DVCAM
M size cassette DVCPRO DVCPRO DVCPRO
L size cassette DVCPRO DV DVCAM
Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM
tapes are to be used in the playback mode, it is recommended that playback be limited to as short a
period of time as possible.
The underlined number and item are the factory settings.
-
20
-