Set the vtr to the menu mode, Notes, Setup-menu init. set ok? (push set key) – Panasonic DVCPRO AJ-D220 P User Manual

Page 18: Set-up (default settings), Changing a setting

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Set-up (Default Settings)

The \/TR’s major settings are performed by making selections using a menu system. The set-up

menus appear on the TV monitor when it is connected to the VIDEO MONITOR OUT connector.

Changing a setting

Set the VTR to the menu mode.

{Set the LOCAL/MENU/REMOTE switch to the MENU position.)

Select the item to be set using the UP (FF) and DOWN (STOP) buttons. The cursor

on the menu screen moves and selects the item.

The cursor (*) is moved to the previous set-up menu item number using the DOWN

button and the next set-up menu item number using the UP button.

Press the DATA+ (PAUSE/STILL) button or DATA- (PLAY) button to change the

setting.

Upon completion of the setting, press the SET button.

The change is now stored in the memory.

To return from the new setting to the original setting, set the LOCAL/MENU/REMOTE
switch to the LOCAL or REMOTE position instead of pressing the SET button.

• To return the setup selections to the factory (default) settings, press the RESET button while

the SETUP menu is shown. The following message is then displayed.

SETUP-MENU INIT. SET

OK? (PUSH SET KEY)

• The default settings will be restored when the SET button is pressed.