1 press [setup] in the stop mode, 2^ ¿zi, Zi changing initial settings – Panasonic DVD-RV40 EN User Manual
Page 26: A, t
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1
SETUP
© .1-Disc languages
® 2 Ratings
Level 8^
W 3 Menu Language
English
«J 4 On-Screen Messages
M 5 FL Display
Bright
tSL 6 TV Aspect
4:3
7 Digital Audio Output
8 Speaker Setting
2-channel
9 Other Settings
Press RETURN to exit
2^
¿Zi
3
¿Zi
Changing initial settings
Change the initial settings to suit your preference and to suit the play
er to the environment in which it is being used.
(Examples are from DVD-RV40.)
Common procedures
1
Press [SETUP] in the stop mode.
The initial settings screen is displayed.
2
Press the cursor buttons
[▲,
T]
to se
lect the item and press [ENTER].
Each
item that can be modified is displayed.
1 Disc Languages (-» page 27)
Change the soundtrack language, subtitle language and
the language used in the disc’s menu to be used for every
disc played back.
2 Ratings (•* page 28)
Change the ratings level to prevent play of discs, skip vio
lent scenes, or replace scenes with others by entering a
password. This is also called a parental lock.
3 Menu Language page 29)
Change the language used for the on-screen displays and
initial settings menus.
4 On-Screen Messages page 29)
Choose whether “Play”, “Still” and other displays will be
displayed or not, and the colour and position of these dis
plays as well as GUI screens.
5
FL Display page 29)
Change the brightness for the FL display.
6 TV Aspect page 12)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output page 37)
Change the settings to suit the type of digital equipment
you have connected.
___________
8 Speaker Setting page 39)
Change the settings to suit the speakers you have con
nected.
9 Other Settings page 30)
Choose the kind of picture shown when play is paused,
and various other settings to enhance your viewing experi
ence.
3
Press the cursor buttons
[A, T]
to se
lect the setting and press [ENTER].
•Some items require additional steps. (See the respective
page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN], (The previous screen is displayed.)
To exit the initial settings screen
Press [SETUP] or [RETURN].
For your reference
•The numeric buttons can also be used instead of the cursor buttons
[A, ▼] for selecting items or settings. Pressing [ENTER] is not
necessary.
VQT8633