beautypg.com

Appendix a: ip table setup, Ethernet oem module crestron eserver – Crestron electronic Ethernet User Manual

Page 36

background image

Ethernet OEM Module

Crestron eServer™

Appendix A: IP Table Setup

The eServer can accept commands from up to eight IP addresses. Three of these IP
addresses are not stored in non-volatile ROM and can therefore be lost after a power
cycle. Commands from the setup menus show the current IP table and implement
changes to the list. Refer to "Add_master" on page 14 for details.

32

Ethernet OEM Module: eServer™

Operations Guide - DOC. 8148