Panasonic NV-FS1 - Manual (Page 25)

For Everyday Recording To Confirm the Programme of a Timer Recording
1
"I
For example:
Programme time for timer recording every day from 10:30
to 11:45 on timer programme number 7.
Programming for everyday recording can be made on any
of the timer programme numbers 1-7.
Execute the operation steps O fo 0.
O Press the (-) Button once, so that all day indications
will appear together.
I Zi
t L
2 SU MO TO WE TH FR S a C
CZD
Perform the operation steps 0 to 0.
For Everyweek Recording
For Example:
Programming a timer recording for a TV programme that is
broadcast every week on Sunday, from 10:30 to 11:45.
(T) Press the Check/Programme Button until “W” is
displayed.
-< DZ.
L V
PROG
C=I
@ Press the (+) or (-) Button to select the programme
position (channel) on which the TV programme will be
broadcast.
(3) Press the Next Button.
(J) Press the (+) or (-) Button to select the day of the
week, on which the programme will be broadcast.
Perform the operation steps 0 to 0.
Make sure that the VTR is turned on.
Make sure that the Timer Record Function is set to “On”.
Select the programme number to be checked, by repeated­
ly pressing the Check/Programme Button.
The preset channel and start and ending times of the timer
recording will be indicated for about 8 seconds.
When the Timer Record Function is set to “Off”, they will be
indicated for about 25 seconds.
I D
i L
f n •
< U • J u
V
s
□
PROG
To Cancel a Timer Recording
Make sure that:
the VTR is turned on,
the Timer Record Function is set to “Off”.
O Press the Check/Programme Button repeatedly, until
the number of the timer programme that you want to
cancel is displayed.
Press the (- h ) and (-]
than 3 seconds.
Button simultaneously for more
•It is impossible to confirm programmes of timer
recordings while an OTR is being performed.
•To turn the VTR on and use it for playback or
recording before the timer recording is performed,
set the Timer Record Function to “Off”.
•When the Timer Record Function is set to “On” but
no video cassette is inserted or no timer recording
has been programmed, the Timer Recording Indi­
cator S will flash to inform that the timer recording
cannot be performed.
•After the programmed timer recording has been
made, set the Timer Record Function to “Off”,
othenvise the VTR cannot be operated normally.
•During recording, the programme position (channel)
on the VTR cannot be changed.
•When you want to watch TV after setting a timer
recording, select the desired channel on the TV set.
•To cancel a timer recording during recording, set
the Timer Record Function to “Off”.