Panasonic NV-FS1 - Manual (Page 12)

SETTING THE TUNER IN THE VTR
The tuner in the VTR makes it possible to receive TV
broadcasts and to record these programmes without having
to turn on the TV set.
liiyniVIHL
O
e
Preparation
•Turn the TV set on and select the programme position
(channel) which you have tuned to the video playback
channel.
•Press the VTR On/Off Switch to turn the VTR on.
•Set the Input Signal Selector to “Tuner”.
•Press the VTR/TV Selector to “VTR” position.
O Press the Preset/Fine/Normal Button.
The indication on the Multi-Function Display changes
from the clock indication to the position indication.
^ Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station.
^ Presee the Band/AFC Button to select the “I”, “HI” or
“U” position.
Display of the programme positions 1-32
I V I I
Indication of the
selected TV band Selection of the
programme position
If' 1 ^
0-5 5 A-11 21-69
1-3 4-11 21-69
The tuner in the VTR can be preset with up to 32
programme positions.
O Press the “-I-” or Button.
During the station search
(The position indication
flashes on and off.)
T uned condition
VlUiilllllillly.
\ P o : I z
b: I
♦
P o - /
b‘ }
•When the tuning of the station is completed, the
indication stops flashing and the tuned station is
automatically memorized.
•At every push of the “-I-” or Button, the station
will be tuned automatically.
Repeat steps 0-0 for each TV station you want to tune to
a desired programme position.
0 Press the Preset/Fine/Normal Button twice.
The indication on the Multi-Function Display changes
to the clock indication,
- ^
•If a strong interference signal exists, the VTR may
tune to this signal although no picture may be
present. If this condition occurs, press the “-I-” or
Button to continue searching.