The video cassette – Panasonic NV-FS1 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
THE VIDEO CASSETTE
1
Inserting a Video Cassette (Auto Operation)
^ Press the Control Panel Open Button.
^ Insert the video cassette as shown. The VTR will be
turned on automatically and the cassette will be
automatically drawn into the VTR.
^ ©
© When a video cassette is inserted, the mark will
appear.
Notes:
•When a video cassette with broken out erasure prevention
tab (for example a pre-recorded tape) is inserted, play
back will start immediately.
•Use [VEl and SivHg video cassette tapes only.
Removing a Video Cassette
O Press the Eject Button (^).
REJECT
Simply press the Eject Button; the VTR turns itself on,
ejects the cassette and turns itself off again.
Auto Operation
The extremely convenient Auto Operation functions of this
VTR include Auto Start and Auto Play when a recorded
cassette with broken out tab is inserted, Auto Eject which
indicates that an inserted cassette is not suitable for
recording. VTR-Off Eject for ejecting a cassette even with
the VTR off, and Auto Rewind at the end of a tape. If the
VTR On/Off Switch is pressed during the rewind mode
including Auto Rewind, the VTR will eject the cassette and
turn itself off when rewinding is completed.