Panasonic NV-HD675 - Manual (Page 7)

9 AUDIO OUT
Selects the desired sound mode.
At the every push of this button, the audio output mode
changes as follows.
During playback:
>Stereo-^L-^R-^Normal audio track-
r
While the broadcast signals are being received:
p»Stereo-»L-»R-|
The Left (L) and Right (R) indicators show which sound
mode is selected as follows on the On Screen Display.
Stereo:
Both the L and R indicators appear.
L: The L indicator appears.
R: The R indicator appears.
Normal; Neither the L nor R indicator appears.
10 No function.
This button is not used to operate this VCR.
11 VCR—TV switch
VCR: Selects the VCR operation mode.
TV; Selects the TV operation mode.
12 INPUT SELECT
Selects the A1 or A2 external recording source.
13 DISPLAY
Changes the indication on the VCR display as follows.
Clock —»Counter—»Remaining Tape Time
During OTR or Play-Off Timer, changes the indication on
the VCR display as follows.
c
OTR or Play-Off Timer Display-^ Clock-
— Remaining Tape Time«—Counter«—
14 G-CODE
Used for G-Code programming.
• Ensure that VCR—TV switch is set to VCR.
15 INDEX
Used for the index search function.
16 REC •
Starts recording.
17 Child Lock Function Buttons
ENTER, OFF (+):
Deactivates all buttons on the VCR and the remote
control by holding down ENTER and OFF (+)
simultaneously until the “X hold” indication appears in
the VCR display.
18 REPEAT
For the repeat playback function.
19 >(PLAY)
Starts playback. “D>" is lit.
20 ►► (FAST FORWARD)
In the stop mode:
In the playback mode:
In the fast forward mode:
“t>D>” is lit.
Fast forwards the tape.
Searches forward.
Obtains high speed picture.
0)
ai
CQ
21 VCR/TV
This button is not used to operate this VCR.
TV OPERATION
Set VCR—TV switch to TV for using POWER (¡), the V
and .A. buttons and the numeric buttons.
22
23
24
22 POWER (!)
Press to switch the TV from on to standby mode or vice
versa. In standby mode, the TV is still connected to the
mains.
•With some TV models, it may only be possible to
switch the TV to the standby mode using this button.
In this case, use AV or the s/ and /s buttons to
switch the TV on.
•Ensure that VCR—TV switch is set to TV.
23 Numeric Buttons
Selects programme positions (1-99) of the TV.
•Ensure that VCR—TV switch is set to TV.
24 AV
Selects TV input or AV input.
25
Selects the required programme position (TV station) of
the TV.
•Ensure that VCR—TV switch is set to TV.
26 VOLUME
~^ +
Adjusts the volume of the TV.