Panasonic NV-HD675 - Manual (Page 6)

Infra-red Remote Controller
The remote control unit for this VCR is a universal remote
controller. As such, some of its buttons are not used to
operate this VCR.
VCR OPERATION
Set VCR—TV switch to VCR for using the
numeric buttons and the G-CODE button.
2 Numeric Buttons
Selects programme positions (1-99) of the VCR.
• Ensure that VCR—TV switch is set to VCR.
9: ©
19: © —© —®
3 OSD
For the On Screen Display Function.
4 RESET
Resets the tape counter (eiapsed time) to “0:00.00".
•The tape counter is automatically reset to “0:00.00"
when a video cassette Is inserted.
5 II/»«- (PAUSE/SLOW)
During playback;
• By pressing: Still picture. “ w\\ ” is lit.
•By pressing for 2 seconds or more:
Slow playback. “ Qt>” is lit.
During recording: Interrupts recording.
Rewinds the tape.
Searches back.
Obtains high speed picture.
(REWIND)
In the stop mode:
In the playback mode:
In the rewind mode:
is lit.
Programmes G-Code numbers.
• Ensure that VCR—TV switch is set to VCR.
7 On Screen Display Menu Operation Buttons
MENU:
Makes the on screen display main menu appear on the
TV screen.
ENTER:
Confirms the selection, or stores.
AY
Makes selections from the on screen display.
•These buttons can also be used for playback, stop,
rewind and fast forward mode.
8 Timer Recording Operation Buttons
CH, DATE, ON, OFF:
Programmes a timer recording.
PROG./CHECK:
Sets and checks timer programmes,
CANCEL;
Cancels the settings made for timer recording.
SPEED:
Selects the desired tape speed for recording.
“SP” gives the best picture quality.
“LP (EP)" gives the longest recording time.
•The indicator (SP, LP or EP) corresponding to the
selected tape speed now appears on the VCR display
or on screen display.
LP: This appears when PAL/MESECAM signals are
input or output.
EP: This appears when NTSC signals are input or
output.
TIMER REC tg:
Turns the timer recording function on and off.
E] is lit or not lit.
Once you operate the timer recording function, normal
VCR operation is not possible unless you press this
button again and release the VCR from the timer
recording standby mode.