Panasonic NV-HD675 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Select the Colour TV System of the TV
Used to Record NTSC Signals
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC INPUT SELECT.
CD
CD
Select AUTO.
Allows NTSC 4.43 or 3.58
signals to be distinguished
automatically.
© ©
MTSC INPUT SELECT
NTSCPBSELECT
NTSC CONVERTER
JET REWIND
POWER SAVE
AUDIO MIX
NTSC INPUT SELECT
NTSC PB SELECT
NTSC CONVERTER
JET REWIND
POWER SAVE
AUDIO MIX
To Select the Colour TV System of the TV
Used to Play Back a Tape Recording
NTSC Signals
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC PB SELECT .
CD
CD
Select the desired position according to the colour TV
system of the TV.
NTSCINPUTSELECT (AUtO
(anPALTV
NTSC PB SELECT
NTSC CONVERTER
JET REWIND
POWER SAVE
AUDIO MIX
(OFF
(ON
OFH
• Normally set at this position. If the tape has not
recorded correctly, select 4.43 or 3.58.
4.43:
When recording NTSC 4,43 signals.
3.58:
When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
5 Press MENU twice to make the on screen display
disappear.
(MENU
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43 signals.
3.58:
For TVs that can receive NTSC 3.58 signals.
5 Press MENU twice to make the on screen display
disappear.
(MiNih
23