Panasonic Panafax UF-127M - Manual (Page 60)

Journal Printout Explanation
(1) Printout date
(2) Printout time
(3) Communication number
(4) Communication result
(5) Number of pages transmitted
or received
(6) Duration of communication
(7) Type of communication
(8) Remote station identification
(9) Communication date
(10) Communication start time
(11) Diagnostic
(12) Own LOGO
(13) Own ID number
(14) Call back message
Day-Month-Year
Hour : Minute
01 ~32 (Does not always begin with 01 when printed out
manually).
“OK" indicates that the transmission was successful.
“S-OK” indicates that i STOP I was pressed during
communication.
Three-digit information code (see page 61) appears when
a problem occurs.
XX (from the ADF) or
XX/YY (from the memory)
XX; Indicates the number of pages successfully
transmitted.
YY: Indicates the total number of pages stored in
memory.
P.(ZZ): Indicates the first page number transmitted from
memory.
Example:
PAGE (START)
02/05 (P.01) Two pages of five were sent successfully but
three pages of five were not sent.
03/05 (P.03) Documents remained in memory were sent
from page number three (P.03) and were
sent three pages.
Hours : Minutes : Seconds
“XMT" means Transmission
“RCV" means Reception
“T" indicates direct dialing or One-Touch/Abbreviated
dialing with no recorded station name.
Day-Month
Hour : Minute
For service personnel only
Up to 25 characters
Up to 20 digits
Appears when voice contact was requested
(see page 52).
55