Panasonic Panafax UF-127M - Manual (Page 57)

B
USING THE MACHINE’S TELEPHONE
Making a Regular Call
You can use the handset on your machine to make regular calls. To do so, lift the handset and dial
a full number just as you would using an ordinary telephone.
1
Lift the handset.
Dial the telephone number on the keypad.
Ex: [2][i][I][i][T]|T][T][I][I][4]
2 1 3 1 1 1 1 2 3 4
Making Voice Contact after Sending/Receiving
You may want to talk to the other person over the telephone after sending or receiving documents.
To do so, perform Step 1 while the machine is still sending or receiving.
1
SPACE
TEL/DIAL
ID DISPLAY
2 1 2 1 1 1 1 2 3 4
, the lamp lights up.
When sending or receiving is over and the other party replies with a Voice Contact request,
you will hear a beep-beep-beep sound coming through the speaker.
When the TEL/DIAL iamp starts blinking, lift the handset.
The TEL/DIAL lamp goes off.
Answering a Voice Contact Request
When you hear a beep-beep-beep sound coming through the speaker, it means you are receiving
a voice contact request. Reply by following the above procedure from Step 3. If no one answers
the request, a “VOICE CONTACT REQUESTED” message will be printed out on the Transmission
Journal {see page 54).
52