Multistation transmission, Fabb^ [tirol – Panasonic Panafax UF-127M User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Multistation Transmission
Using the built-in memory you can send a document sequentially to more than one station at one
time. This saves you the trouble of sending the same document to each station one after another.
T
NOT€
Place a document face down on the ADF.
Adjust left and right Document Guides.
■
1 5 - 1 0 - 1 9 9 1
1 5 : 0 0
■
1 5 - 1 0 - 1 9 9 1
1 5 : 0 0
Dial by pressing a One-Touch key, i ABBR land
two digits, I TEL/DIAG and a full number.
Ex: iABBRir5]r7l
fABB^ [Tirol
START
[ 5 7 ]
5 3 2 7 8 9 0
[ 2 0
5 3 1 6 7 8 9 0
c
Your machine will print out the following list to
confirm the numbers you want to send to.
After printing out, your machine will feed the
document to store into the memory.
01
0 5
Dialing begins automatically.
When transmission ends the machine will print
out a Memory Transmission Journal (GOMM.
JOURNAL) (see page 59) and the document in
the memory will be erased automatically.
The machine returns to standby.
[ 5 7 ]
5 3 2 7 8 9 0
1 5 - 1 0 - 1 9 9 1 1 5 : 0 0
1. You can enter up to three Direct dialings by pressing |TEL/DIALl and a full number.
2, If you press I STOP j white the machine is still dialing or sending the document, the multistation transmission will
be canceled and the document stored in the memory will be erased automatically.
44