Panasonic Panafax UF-127M - Manual (Page 47)

MEMORY TRANSMISStON
The memory function allows you to perform easily many different tasks. If you wish, you can store
your documents into memory and then have the machine transmit the stored documents. After trans­
mission is completed, the stored documents are erased automatically.
The advantages of memory transmission are:
1. The same document can also be transmitted to multiple stations.
2. If communications fail when transmitting from the memory, your machine wilt retransmit the
remaining unsuccessful page(s) automatically.
NOT€
В
1. When you use memory transmission, a Memory Transmission Journal (COMM, JOURNAL) is printed out
automatically after transmission. This report lets you verify if transmission was successful or not (see page 59),
2, If a memory overflow condition occurs while storing document(s) into the memory, the machine will start transmitting
those pages which are successfully stored. If you wish to cancel this transmission, press f^OP
\
and confirm
on the display (see Specifications, page 72 for the Image Memory Capacity).
8 7 0
3, The percentage of memory used is shown by " a " mark at the left corner of the display and the two-digit code
at the right corner indicates the number of pages storing into the memory.
0 2
(Each - represents 10% memory used.)
4. INFO. CODE = 633 will be displayed if there is no answer at the receiving side after the last automatic redial.
The document stored for this transmission will be erased from the memory automatically and the Memory
Transmission Journal (COMM. JOURNAL) will be printed out stating the transmission is “INC” (Incomplete).
6 3 3
5. If a power failure occurs, the document information stored in the machine's memory will be lost. In this case the
Power Failure Report will be printed out automatically after the Power is turned ON again. The report is not print­
ed out if there were no documents stored in the memory.
42