Setting the clock of the vtr, Preparation, For example – Panasonic NV-SD1 Series User Manual
Page 5: Display symbols, Keep clock set pressed for more than 2 seconds, 2 set each item by pressing + or — and next, Set year “99, Set month “10, Set date “16, Set hour “20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Clock of the VTR
The built-in clock is used to activate the timer for automatic
recording and must be set to the correct time.
The built-in digital clock employs the 24-hour system.
Preparation
Turn on the VTR.
Note:
The clock operates for at least 5 minutes by its backup
system in the event of po\wer failure.
For Example:
Date; 16th, October, 1999
Time; 20:15
Operations
Display Symbols
1
CLOCK
SET
©
Keep
CLOCK SET
pressed for more than
2 seconds.
2
Set each item by pressing + or — and
NEXT.
/\
o
- -
L IJ
Set Year “99”.
Set
Month
“10”
Set
Date
“16".
Set
Hour
“20”.
Set Minute “15”.
•There is no need to press NEXT,
CLOCK
SET
©
CIJ 1%
Press
CLOCK SET.
•The clock will start.
Time Reset Function
If the clock is less than two minutes slow or fast, it can
easily be reset to the proper time.
For example; Resetting the clock to 12:00.00.
1 Keep CLOCK SET pressed at any time between
11:58.00 and 12:01.59 for more than 2 seconds.
2 Press CLOCK SET again as soon as you hear the
12:00.00 time signal.