Assembly editing, H search for the end of the previous recording, 2 press pause/still at the end point – Panasonic NV-SD1 Series User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly Editing
This enables you to record a new segment immediately
after a previously recorded segment.
This function can be used to make up an edited tape from
other recordings or video sources,
A new scene can be added to the end of a previous one.
AUDIO/VIDEOiN
Preparation
•Connect a movie camera or another VTR to this VTR as
shown.
• Insert a recorded cassette tape with an intact erasure
prevention tab.
•Select the video source required by pressing v /v to set
"Al”on the display.
□□ HEC
Operations
w
H Search for the end of the previous
recording.
PLAY
[>
2 Press
PAUSE/STILL
at the end point.
„ PAUSE/
" STILL
O
3
Set for the new recording by pressing
REC.
(
• REC
Start the new recording by pressing
PAUSE/STILL
again.
„ PAUSE/
" STILL
O