On-screen displays (osd), Function & channel display, Blank tape/ no video signal indication – Panasonic PVQ-V201 User Manual
Page 22: Vcr status & clock display, To display or remove overlay at right, Warning and instruction displays
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

On-Screen Displays (OSD)
Function & Channel Display
When a function
button is pressed, e.g.
PLAY, or you change
channels, a 4 second
display appears first
in large and then
small characters.
Blank Tape/ No Video
Signal Indication
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with the Weak Signal Display
Feature (page 19) set to OFF, the TV
screen will turn solid blue.
VCR Status &
Clock Display
To display or
remove overlay
at right,
--> press DISPLAY.
Function Status Current Time Channel
Ree Time Remaining
(OTR mode only,
see page 12.)
i2:OÙWil АВс'
SP,
\
Counter
(See page 4.
Warning and Instruction Displays
These displays will alert you to a missed
operation or provide further instructions.
OSD
Caution
РЯ
OSD
Caution
РЯ
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PRESS CH UP KEY AGAIN
If no active channels
are found for
CHANNEL
MEMORY...
8
TO CANCEL TIMER REC
PRESS POWER THEN
STOP KEY
If you press POWER
or STOP during a
Timer Recording...
(visible in VCR
mode only)
13
PLEASE SET CLOCK BY ’
PRESSING ACTION KEY
If you attempt to set
or review a Timer
Recording and the
Clock is not set...
13
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END :PLAY
If head cleaning
becomes
necessary white
playing back a
tape...
21
TURN VCR OFF
FOR TIMER RECORDING
After a Timer
Program has
been set...
13
VCH LOCK ACTIVATED
If you press a
function button
other than STOP/
EJECT or POWER
while the VCR is in
VCR Lock mode...
19
CHECK CASSETTE
RECORD TAB
If you press REC on
the remote control or
VCR, and a cassette
is inserted with no
record tab...
4
REMOTE CONTROL 15 SET
TO TV MODE
USE VCR ; VCR KEY
If you press an
invalid key on the
remote while in
TV mode...
14
18
NO CASSETTE
PLEASE INSERT A CASSETTE
If you press PLAY,
FF, REW, or REC on
the remote control or
VCR without a
cassette inserted...
12
22
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to ; [email protected]