Panasonic PVQ-V201 - Manual (Page 19)

’Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
DISPLAY
SELECT/
SET
A :PLAY
T :STOP
► :FF
^ :REW
SEARCH
ACTION
RESET
COUNTER
TAPE
POSITION
Weak Signal Display ON/OFF Feature
When “ON,” picture is displayed regardless of signal
strength.
1
REPEAT PlAY lOfF RE htOT^ WARNING ON
AUTO SMUT*OFf:
IDlOhUVLANGUE : ENGLISH
VCR S OUTPUT C h :3
Press ACTION
to display menu.
Press
-4
^
to select and display
CHANNEL,
press AT
to select WEAK
SIGNAL DISPLAY,
and press ► to set
ON or OFF.
ON; Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
OFF: Screen turns solid blue when signal is weak
or non-existant.
• Selecting ON has no effect on connected
equipment with blue back feature.
Press ACTION
to return to normal screen.
VCR Lock Feature
When set to ON, all operations except
for timer record and tape eject are
prohibited. Useful for households with
small children.
VCfl LOCK ACTIVATED
VCR LOCK OFT
To turn on,
hold down REC on
the VCR in Stop
mode with no tape
inserted for 7 sec.
(Please ignore the
NO CASSETTE
warning.)
To turn off,
repeat above.
VCR Lock cancels in 24 hours if
clock is set.
REC
AutoShut'Off Feature
When set to ON, VCR shuts off if blank tape is
played or no signal is detected for 5 min.
1
Press ACTION
to display menu.
Press AT
to select AUTO SHUT­
OFF and press ►
to set ON or OFF.
Press ACTION
to return to normal screen.
19