Tape operation special vcr features, Coi^'ftunnep – Panasonic PVQ-V201 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tape Operation Special VCR Features
Repeat Play
Set to playback a recording over and over.
1
Press ACTION*
to display menu.
r-y№~i
•COi^'ftUNNEP
FItMOTC
ON
vors 0«/tPUTC*t
^
Press
AT
to select REPEAT
PLAY and press ► to
set ON or OFF.
Play repeats at tape
end or if unrecorded
portion over 30 sec.
is detected.
Press ACTION
to return to normal screen.
Zero Search
To quickly return to a specified tape location,
1
Press DISPLAY during play
to display Counter.
KAY 12:OOAM
Press
RESET
COUNTER
at
desired position
to reset to “0:00:00"
Continue to record, playback, etc.
^ Press Stop.
Press CM/ZERO
in stop mode
to start ZERO
SEARCH.
Unit will go into FF
or REW mode and
stop at the last point
the Counter was set
to 0:00:00.
If a blank portion exists on the
tape, and depending on the position
of the V mark, the V mark display
Tape Position Display Feature
To find out the present tape position.
Tape
position
cannot
be
detected
for
VHS-C
Cassette type and tapes less than 60 minutes
in length.
1
Press TAPE POSITION
to detect tape position.
DETECTING TAPE POSmON ,
“DETECTING TAPE
POSITION” only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
■^0
The present tape
position indication is
displayed.
Press TAPE POSITION
to return to normal screen.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 16), and this
feature is set to on, a warning appears whenever
an invalid key is pressed in TV mode.
1
Press ACTION
to display menu.
i
VCR
l_:tlOCKl
CHANNEL
REPEAT PLAY OFF I
ALTTO SHUT - OFF :ON
DiOUAilANGUE: ENGLISH
VCR'S OUTPUTCH :3
Press AT
to select REMOTE
WARNING and press P
to set ON or OFF.
• If “OFF," remote
warning will not
appear if invalid
key is pressed.
Press ACTION
to return to normal screen.