Cabletron Systems 3Com PortSwitch Hub - Manual (Page 54)

9032295 E2 Application Views
5-9
Security Application
Category
Displays the categories of traps in which the Destination is interested.
Table 5-2 shows possible values and descriptions.
Throttle
The maximum rate at which the Destination is willing to receive traps, in
milliseconds. A value of 2000 will limit the traps to one every 2 seconds. A
value of 0 indicates that no trap throttling is required. You can update this
field.
Row Status
The status for this entry.
Table 5-3 shows possible values and descriptions.
Table 5-2. SNMP Trap Categories
Value Description
‘00000001’h High priority configuration traps
‘00000002’h Low priority configuration traps
‘00000004’h High priority security traps
‘00000008’h Low priority security traps
‘00000010’h Alarms and polling traps
‘00000020’h Regular heartbeat traps
‘00000040’h End Station Table traps
‘00000080’h Reserved
‘00000100’h Physical entity traps
‘00000200’h Facility traps
‘00000400’h Service related traps
0xFFFFFFFF Enables all traps
Table 5-3. SNMP Trap Row Status Values
Value Description
Active This status can be displayed and set
NotinService This status can be displayed and set
NotReady This status can be displayed but not set
Create&Go Used only when adding entries
Create&Wait Used only when adding entries
Destroy Deletes the entry