Cabletron Systems 3Com PortSwitch Hub - Manual (Page 21)

Chassis Device View
Chassis Device Icon
Device Views 3Com PortSwitch Hubs
2-4 Management Module Guide
Module Identification Label
This label provides the following information (see Figure 2-2 ):
Module Number
Displays the position of the module in the hub stack. Double-click this area to
open the Notes view described in the SPECTRUM Views Reference.
Device Type Label
Identifies the type of device.
Module Icon Subviews Menu
Table 2-1 lists each of the device-specific Icon Subviews menu selections
available for this device. For information on Accessing SPECTRUM Views , see
Chapter 1, Introduction .
Port Identification Label
These labels provide access to the Icon Subviews menu for the individual
ports. The labels contain the following information (see
Figure 2-3 ):
Table 2-1. Module Icon Subviews Menu
Menu Selection Description
Module Notes Opens the Notes view described in the
SPECTRUM Views Reference.
Module Configuration Opens the Module Configuration View described
in Chapter 3, Configuration Views .
Module Performance Opens the Module Performance view described in
the SPECTRUM Views Reference.
NOTES
The callouts displayed in this illustration identify the label name and the
view to which it provides double-click access. For example: Port Number/Port
Notes View displays the port number and provides double-click access to the
Port Notes view.
The menu displayed in the illustration is the Icon Subviews menu for that
label.