Cabletron Systems 3Com PortSwitch Hub - Manual (Page 41)

Device Events and Alarms
Event and Alarm Messages 3Com PortSwitch Hubs
4-8 Management Module Guide
CsEvFormat/Event00ea0043
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} in a resilience pair has had a
change in state and the active port has
been switched. The state of the main
port is {I 1} the state of the backup port
is {I 3} (1=Failed, 2=OK, 3=OK-And-
Active) (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0044
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} in a resilience pair has had a
change in state and the active port has
not been switched. The state of the
main port is {I 1} the state of the backup
port is {I 3} (1=Failed, 2=OK, 3=OK-
And-Active) (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0045
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a
topology change has ocuured in the ring
at time {I 1}. (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0046
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
main rings state has changed to {T
rstate 1}. (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0047
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that the
backup rings state has changed to {T
rstate 1}. (event [{e}])
No Probable cause message.
Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message