Cabletron Systems 3Com PortSwitch Hub - Manual (Page 45)

Device Events and Alarms
Event and Alarm Messages 3Com PortSwitch Hubs
4-12 Management Module Guide
CsEvFormat/Event00ea0078
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a
security violation has occured on port {I
2} (slot. port. MAC-Address). The port’s
admin status is now {I 3} (1=Enabled,
2=Disabled) (event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0079
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had a change in auto partition
state. The new state is {I 1}.
(1=Partitioned, 2=Unpartitioned)
(event [{e}])
No Probable cause message.
CsEvFormat/Event00ea0080
{d “%w- %d %m-, %Y - %T”} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} has had a change in link state. The
new state is {I 1}. (1=Partitioned,
2=Unpartitioned) (event [{e}])
No Probable cause message.
Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause
Message