Storing the telephone numbers, Setting the timed recall (flash) – Panasonic KX-T2396BA User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
storing the telephone numbers
Make sure that the handset is on the cradie, the MONITOR indicator is off
and the AC adaptor is connected. When you store a telephone number
into memory, pressing 0 through 9, #, PAUSE, or RECALL button
counts as 1 digit.
PROG button
- 2 1 -
Setting the Timed Recall (Flash)
The timing of recall signal must be within the requirement from your Central
Office or Host PBX. Depending on your PBX, you may have to reprogram the
recall signal. 3-digit numbers (100 through 950 msec, every 50 msec) are
available for the recall signal—100,150,200,...950 msec.
The timing of recall signal is preset to “450 msec”.
To program the timing of recall signal
1
5
PAUSE
CD
CD
CIBAH
CD
1 OWEn (
PAUSE
CD
CD
CLEAR
CD
CD
tOWER (_
Press the PROG button.
The STORE indicator light is on.
Press the RECALL button.
The STORE indicator goes out.
Enter the 3-digit number that your
PBX requires.
(For example, to program 600 msec
for recall signal, enter "600”.)
Press the HOLD button.
The STORE indicator light is on.
Press the PROG button after storing
all the numbers.
The STORE indicator light goes out.
- 2 6 -