Panasonic KX-T2396BA - Manual (Page 16)

Checking your recorded OGM
Press the OGM PLAY button.
Press the OGM PLAY button
again if you want to stop the
operation halfway.
The unit will be ready to answer
the calls after 10 seconds.
Using your answering machine
After having done all the preparations for this unit (including connection),
the unit resets the tape, and 10 seconds later, the ANS/CALLS indicator
light is on.
Now your unit is ready to answer the phone call.
(The unit is set to the answer mode.)
Then it will record the callers' messages.
- 1 5 -
Piaying back the tape from the beginning
Press the PLAYBACK/PAUSE
button.
The unit rewinds the tape and
plays back your messages.
3 beeps will be heard indicating
the end of the last message.
After 10 seconds, the unit will
rewind the tape, and new
message will be recorded from the
beginning of the ICM part of the
tape.
Adjust volume, if needed.
To pause during playback
Press the PLAYBACK/PAUSE
button during playback to pause
the unit.
The PWR/IN USE indicator flashes
(pause mode).
Press the PLAYBACK/PAUSE
button again to restart playback.
To rewind during playback
Press the REW button to rewind
the tape to the desired location.
The unit will play back the
message again after you release
the REW button.
If you keep pressing the REW
button until the unit rewinds to the
beginning of the tape, a beep will
be heard. In this case, the unit has
been reset to the answer mode.
- 3 2 -