Panasonic KX-T2396BA - Manual (Page 21)

Hold Pause
The HOLD button is used to keep
a call on hold while having a
conversation.
Press the HOLD button while
having a conversation.
The HOLD indicator flashes.
You may place the handset on the
cradle.
Releasing a hold
• If the handset is off-hook;
press the HOLD button again.
•If the handset is on the cradle
(on-hook):
lift the handset or press the
MONITOR button.
•When using another telephone
connected on the same line;
lift the handset of the other
telephone. If the hold is not
released, press the hookswitch
of the other telephone for about
one second.
The PAUSE button is helpful in the
automatic dialling when accessing
an outside line. To use this
function, store “pause” with the
telephone number into the memory
station beforehand.
While storing the telephone number
Into the memory, one pause is
required when waiting for an
outside dial tone.
Example:
P9M PAUSE
l|H
I__ I
Telephone No.
Line access number
Press once (3.5 seconds pause)
Press twice (7 seconds pause)
Combination dialling
A telephone number with more
than 32 digits can be stored into
two memory stations. For dialling,
follow the next:
1. Lift the handset, and identify the
dial tone.
2. Press the direct call button "1”.
3. Press the direct call button “2".
Instead of using two memory
stations, you can store a part of
the telephone number into one
memory station, and the other part
can be dialled manually.
1. Lift the handset, and identify the
dial tone.
2. Press the station key, wait for
dialling to stop, then dial
manually.
- 0*7
Making calls using the iower memory iocation
1
2 t
CD CD mod
____ /
Ш
- --------------------------------------------
CD s CD CD
1
..... >
CD
V______
CD CD
MfffflECALL
iOvrtf* (
Lift the handset or press the
MONITOR button, then identify the
dial tone.
Press the LOWER button, then
press the direct call button in
which the number that you want to
dial is stored.
If you press the LOWER button by
mistake when you want to use the
upper location, you must hang up
and then dial again.
Memory card
Use a pencil or a bail-point pen to fill in the station directory with station
name. (You can use the reverse side for writing, too)
Remove the cover using an instrument with a pointed end, like a pen.