Recording tape to tape – Panasonic RX-DT770 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording Tape to Tape

When the Deck 1 pause and record buttons are pressed, tape editing starts by pressing the Deck 2 playback button.
Oniy normal tape can be used with this unit.

STOP/EJECT

Take up the leader tape before proceeding. (Refer to page 17).

i TAPE

STOP/EJECT

Press TAPE.

Press Deck 1 STOP/EJECT

and insert the tape to be re
corded.

Insert the tape with the side to be re

corded facing you.

PLAY

Press the Deck 2 PLAY.

Editing is started by means of the synchro-start function.
Do not press CD orTUNER/BAND during editing.
Do not change the editing selector during editing. The playback

sound may flutter.

Some TV sets generate noise that could be recorded during editing.
To prevent the possibiiity of this, do not use this unit closer than

1.5 m to a TV set.

Press Deck 2 STOP/EJECT
and insert the tape to be
played back.

Insert the tape with the side to be
played facing you.

TAPE EDIT

Select the editing speed by

normal

1 J-HIGH

setting TAPE EDIT.

HIGH ; High speed
NORMAL: Norma! speed

To stop the editing:

STOP/EJECT

Press the Deck 1 and Deck 2

STOP/EJECT.

For your reference:

Recording is not affected by changes made to the volume or tone

quality during the recording.
The recording level will be set automatically.

Press Deck 1 PAUSE, then

press IRECI.