Panasonic RX-DT770 - Manual (Page 10)

Listening to CDs
To load CDs
CD Press CD.
0 ( Pise 1 J DISC^ ( 0tsc~3 1
0 CDSJECT
0 Press one of the disc but­
tons (DISC 1-3) to select
the disc.
When you load only one disc, you
can skip this step.
0 Press ^ CD EJECT, insert
the CD and close the lid.
Insert the CD with its label surface
facing up.
Be sure to place 3" (8 cm) discs in
the center of frie tray.
Label Be sure to load only
one CD on a tray
Repeat step 2 to load more
CDs.
Concerning the disc display and the disc trays
Bass range Treble range
ikH:
To play one CD
Before proceeding, follow steps 1, 2 -C 2 ) of 'To load CDs” on the left.
Press ►/!!. r
Disc number
in play Elapsed play time
of track in play
' so
i
¿>__ ____
>
Track number in play
Play starts from track 1 on the disc at
the playing position and continues to
the last track, after which it automati­
cally stops.
Total number of tracks
Total play time
To stop play:
Press «/CLEAR.
To stop play temporarily:
Press ►/!!.
To resume play, press ►/!! again.
To play desired disc:
Press DISC 1-3 to start play.
• If a CD is loaded on the tray at the playing position, pressing ►/!!
will automatically turn the unit on and start play.
• If “NO DISC” appears on the display, it indicates that there is no
disc loaded.