Panasonic RX-DT770 - Manual (Page 17)

Recording from CD
Synchro recording
(See page 18, 19.)
• Recording can be perfomned from part-way along the tape.
• If the tape reaches its end part-way through a track, the track is
cut off.
• Recording stops when 1 CD is completely recorded.
Recording 1 CD;
Cut off at the 4th track
SIDE A
SIDE B
1 2 3 4 1
7 6 5
D
Empty space
Recording 3 CDs:
Remainder of the 4th track
SIDE B
DISC 1-
Cut off at the 2nd track
—,,— DISC 2-4-
1 2 3 4 1 2 :
2 1
I-------- DISCS
D
Remainder of the 2nd track
on disc 2
■ Please read the following notes before recording
To wind up the leader tape:
Type of tape which can be used for recording;
Normal position/TYPE I 0
High position/TYPE II X
Metal positionTTYPE IV X
The sound may not be recorded properly if high-position tapes and
metal position tapes are used with this unit.
For your reference:
• in order to prevent trouble caused by flat batteries, it is recom­
mended that you either supply power to the unit from the house­
hold AC outlet or replace all the batteries with new ones when you
are recording something which is important to you.
• Any change made to the volume or sound quality during recording
will not affect the recording.
• The recording level is set automatically.
Magnetic part of tape
Leader tape
(on which nothing
can be recorded)
17