Panasonic NV-L20 - Manual (Page 28)

TIMER RECORDING (CONT O)
For Everyday Recording
When programming an everyday recording using the bar
codes, you have the choice between 3 different modes:
Sunday through Saturday, Monday through Friday, and
Monday through Saturday.
f
EVERYDAY EVERYDAY EVERYDAY Ì
(SU-X..SA) (MO-^FR) (MO -w sa ;
□ iilli □ JIlii □ illllllll
à e
__ © J
(T) Turn on the Digital Scanner and trace the "CHANNEL"
bar code.
@ Trace the desired “EVERYDAY" bar code (O, Q, O)-
EVERYDAY
(SU^SA)
SUMOTUWETHFnSA
1
I
ON OFF
(3) Trace the "START TIME" and then the “END TIME'
bar codes, and transmit the data to the VTR.
SUMOTUWETHRtSA
ON
8 •on •uu
OFF
t n n n
l U U U
• Everyday recording will be performed from that day on.
• If a “DATE" bar code is traced after tracing the
“EVERYDAY" bar code, everyday recording will not be
performed.
For Everyweek Recording
0 Turn on the Digital Scanner and trace the "CHANNEL"
bar code.
^ Trace the bar code for the desired day of the week
among the "EVERYWEEK" bar codes.
EVERYWEEK
Sunday------- —1
mini
Monday------ —®
lini
Tuesday— —H nil
Wednesday------ ®
Illllllll
Thursday—
—m
inilll
Friday-------- —11
llilllll
Saturday— —s illRI
0 Trace the "START TIME" and then the "END TIME"
bar codes, and transmit the data to the VTR.
su
ON
8
OFF
u u u u
• Everyweek recording will be performed from that week on.
• If a "DATE" bar code is traced after tracing the “EVERY­
WEEK" bar code, everyweek recording will not be per­
formed.
To Confirm the Programme of a Timer Recording
To perform this operation, the VTR must be turned on or it
must be in the timer recording standby mode (Q indication
is lit).
^ Trace the "CHECK" bar code.
r
;
CHECK
D-
r
L
Perform transmission.
•After releasing the Transmit Button, the programmée
data will be displayed for about 12 seconds (for about
25 seconds, if the 0 indication is not lit) on
Multi'Function Display. ^
•At every push of the Transmit Button, the timer pro
gramme number advances to the next higher num
ber.
To Cancel a Programmed Timer Recording
To perform this operation, the VTR must be turned on bu
not be in any of the recording or playback operation modes
or it must be in the timer recording standby mode (0 indi
cation is lit). To cancel a programmed timer recording
data must be displayed on the Multi-Function Display.-,
they are no longer displayed, first, trace the “CHECK" ba
code and perform transmission (several times, i f necessary
until the programme you want to cancel is displayed). Then
within 12 seconds.
0 Trace the “CANCEL" bar code.
0 Perform transmission.
•To programme a new timer recording, perform thi
programming from the beginning.
28