Panasonic NV-L20 - Manual (Page 18)

PLAYBACK (CONT’D)
Digital Tracking Selector
Rewind and Fast Forward
Press the Rewind -^/Review Q Button to rewind the
tape.
REW/0
Press the Fast Forward ►►/Cue Q Button to wind the
tape forward rapidly.
©/FF
Lap Time Counter
It shows the elapsed recording or playback time.
—
Hours Seconds
j Minutes
The indication will appear when the tape is
rewound further than the tape counter position
■‘0:00.00" •
• If the figures on the Tape Counter do not change
during Fast Fonward, Rewind or any of the Playback
functions, this means that nothing is recorded on
that tape section.
•The Tape Counter is automatically reset to
“0:00.00” when the video cassette is inserted.
Digital Tracking
ON: Select this position for digital tracking.
When playback is started after inserting a cassette, and the
VTR Is turned on, the Digital Tracking function will be
activated automatically, the digital Tracking Indicator will
flash for several seconds, and the tracking will be adjusted
automatically (after the adjustment, the Digital Tracking
Indicatorwill remain lit).
• During playback, the Digital Tracking function will be ac­
tivated whenever the playback changes over from an un­
recorded part to a recorded part, provided the recorded
part is longer than 4 seconds.
•When the picture is distorted by noise bars, press
the Tracking (+) or (-) Button to select manual
tracking smd adjust with these two buttons. The
Digital Tracking Indicator goes out.
To change back to Digital Tracking, press the
Tracking ( h -) and (-) Buttons simultaneously.
J
Manual Tracking
OFF: Select this position for manual tracking.
•When the playback picture is distorted by noise bars, ad­
just by pressing the Tracking (- h ) or (-) Button.
•To return the tracking control to the former setting, press
the Tracking (+) and (-) buttons simultaneously.
1 8