Panasonic NV-L20 - Manual (Page 15)

REW/e — PLAY/X2----------e/FF
I » I
STOP PAUSE/STILL
PICTURE ® ®
SOFT Q SHARP
KJ
@ (D
Preparation
• Make sure that the Timer Record Function is set to ‘‘Off’’,
• Insert a recorded video cassette.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Turn the TV set on and select the video playback channel.
• Set the Noise Filter/Edit Selector to “Off".
• Set the Digital Tracking Switch to “On".
Normal Playback
Press the Piay/x2 Button (►)..
PLAY/X2
• Control the picture as you like with the Picture
Sharpness Control (sharp or soft contours).
"To Finish Playback
Press the Stop Button (R) to stop the playback.
fO
Super Still Playback
When the VTR is in the playback mode, press the Pause/
Still Button (II) to view a still-picture. To continue the nor­
mal playback, press this button again.
O
Cue Playback
When the Fast Forward ►►/Cue © Button is kept
pressed while the VTR is in the playback mode, the tape
will be played back at high speed in forward direction.
0/FF
Q Review Playback
When the Rewind ■♦^/Review (© Button is kept pressed
while the VTR is in the playback mode, the tape wilt be
played back at high speed in reverse direction.
REW/©
To make possible Cue or Review playback without having
to keep the respective button pressed, first press the
Memory/Repeat/Search Button on the Remote Controller
so that the Search Indicator “S” appears in the Multi-
Function Display, and then press the Fast Forward ►►/
Cue © Button or the Rewind -<^/Review © Button.
To switch the VTR back to normal playback, press the
Play/x2 Button (►).
•When Cue or Review playback continues for more than
10 minutes, the VTR will automatically switch back to the
normal playback mode.
O
Double Speed Playback
When the VTR is in the playback mode, press the Ptay/x2
Button to view the action at twice the normal playback
speed. To change back to normal playback, press the Play/
x2 Button (►) again.
PLAY/X2
* 2
J
PAUSE/STILL
15