Panasonic NV-L20 - Manual (Page 11)

How to Select the Programme Position (Channel) on
the Remote Controller
PRESET PROG — ^ NEXT BAND/AFC CLEAR
□ □ □ □ □ □ □ □
FINE/NO IMAL TRACKING
OO-KD® ®- m ®
Blanking of Unoccupied Programme Positions
^ Press the Preset/Fine/Normal Button.
0 Press the Channel Up or Down Button to select a pro­
gramme position (channel) which you do not want to
tune to a TV station.
^ Press the Clear Button ('- will be displayed in the
Programme Position Indication).
b ■
CLEAR
□
• Repeat steps and @ for any programme positions
on which no stations are to be tuned. Afterwards,
these programme positions will be skipped during
Up/Down selection of the programme position.
Q Press the Preset/Fine/Normal Button twice.
Cancelling the Clear function (Blanking)
(J) Press the Preset/Fine/Normal Button.
To cancel the blanking of a programme position, select
that programme position on the VTR and then press
the Clear Button.
(3) Press the Preset/Fine/Normal Button twice.
□ E B
0 0
select channel press button
1-9
10
20
m-H respective channel
EE3-*^CH-"CI1
11-99
for example 32 1 2 (
If more than 5 seconds pass between the first, second and
third push, the channel will not be changed normally.
1 1