Panasonic KX-F195 - Manual (Page 94)

Error code
The error codes appears on the display when any troubles occur.
AM 1 0 - 3 6 E - 0 9 00
-Error code
The error code also corresponds to the numeral following "NG” on the JOURNAL and the TX
REPORT.
ERROR CODE CAUSE & REMEDY
01
Power supply overheating, Allow the unit to cool.
02
Interrupted transmission. Retry or check parameters.
03
Document jammed or not fed into the unit properly. Check document path.
If a document is jammed, open the cover, then remove the document.
04 Transmission or reception error. Retry the operation.
05 Printing head overheating. Allow the unit to cool.
06 The unit is out of recording paper. Check recording paper.
07 The cover is open. Check cover latch.
08 Recording paper jammed. Re-install recording paper.
09
Network communication failed.
Confirm that your passcode corresponds to that of the other unit.
20 Memory check error. Memory (phone numbers, parameters, etc.) has been
erased. Reprogram.
21 Power failed. Call counter=“-
Check your messages.
22
Timer 1C error.
30 OGM is not recorded. Record your OGM.
31 Microphone error.
32
ICM recording tape is broken or not installed. Install a new tape, and record
your OGM.
6-1