Panasonic KX-F195 - Manual (Page 3)

Introduction
Multi-function system using one
telephone line
General:
•Desk-top type
•Combined facsimile, answering device and
integrated telephone
•Single telephone line operation
•Automatic facsimile/telephone switching
•Clear copies
•Automatic paper cutter
Facsimile (FAX):
•CCITT G3 compatibility
•Transmission time*: Approximately 17 seconds
per page
•Automatic document feeder for up to 10 pages at
a time
•One touch transmission with automatic dialer
•16-level halftones
•Superb image quality
•Polling function
•Network communication
•Sends/receives 216 mmx600 mm
(8i/^"x23^") pages at CCITT G3
•Automatic fall back {9600/7200/4800/2400 bps)
•Automatic redialing
*Transmission times apply to text data using
CCITT No. 1 test chart, between sa.me machine
models at maximum modem speed. Transmission
times vary in actual usage.
Telephone Answering Device (TAD):
•AUTO-LOGIC (One touch operation):
The unit automatically plays back all recorded
messages and stops at the last message, then
provides for answering the next call at the touch
of a button.
•Record 2-way telephone conversation
•Outgoing Message (OGM) stored on chip
•Remote control from touch tone telephone
Telephone System (TEL):
•Call monitor for on-hook dialing
•One touch dialing and speed dialing
•Automatic redialing
•Pulse-or-tone dialing capability
Speaking with the other party,
and then transmitting/receiving
a document
With the automatic facsimile/telephone switching
feature, you can switch between facsimile and
telephone functions on the same call. This means
that even if you are in telephone conversation and
want to transmit/receive a document, you need
only press the START/COPY button. Thereafter,
facsimile transmission/reception can be performed
automatically.
Three types of receiving modes
TAD/FAX mode:
When you wish to use the unit as a telephone
answering device and a facsimile, select this mode,
When a call is received during your absence, the
unit records a voice-message and/or receives a
document automatically depending on the caller’s
choice. In this mode, you also are able to speak
with the other party and transmit/receive a
document manually.
The unit automatically distinguishes between voice
and fax calls.
a) If the unit detects a fax tone during OGM, it will
switch automatically to the fax mode.
b) If the other party presses the asterisk (*) key
during OGM or ICM recording mode, it will
switch automatically to the fax mode.
c) If the caller’s voice is heard within 5 seconds of
the end of the OGM, the unit functions as an
answering device.
FAX mode:
When you wish to use the unit as a facsimile
machine only, select this mode.
If someone calls you when you are in the FAX
mode, a fax tone sounds and the person cannot
talk to you. Please inform your callers that this is a
fax only telephone number.
When in the FAX mode, you may still use the fax
telephone to place outgoing voice calls.
TEL (Telephone) mode:
When you wish to use the unit as a standard
telephone, select this mode. If you wish to receive
the incoming fax during telephone conversation,
press the START/COPY button.
-
2
-